MySQL is an open-source database management system, commonly installed as part of the popular LAMP (Linux, Apache, MySQL, PHP/Python/Perl) stack. It implements the relational model and uses Structured Query Language (better known as SQL) to manage its data.
This tutorial will go over how to install MySQL version 8.0 on an Ubuntu 20.04 server. By completing it, you will have a working relational database that you can use to build your next website or application.
To follow this tutorial, you will need:
You can also use an interactive terminal that is embedded on this page to experiment with installing and configuring MySQL in this tutorial. Click the following
Launch an Interactive Terminal! button to get started.
On Ubuntu 20.04, you can install MySQL using the APT package repository. At the time of this writing, the version of MySQL available in the default Ubuntu repository is version 8.0.27.
To install it, update the package index on your server if you’ve not done so recently:
- sudo apt update
Then install the
- sudo apt install mysql-server
Ensure that the server is running using the
systemctl start command:
- sudo systemctl start mysql.service
These commands will install and start MySQL, but will not prompt you to set a password or make any other configuration changes. Because this leaves your installation of MySQL insecure, we will address this next.
For fresh installations of MySQL, you’ll want to run the DBMS’s included security script. This script changes some of the less secure default options for things like remote root logins and sample users.
Run the security script with
- sudo mysql_secure_installation
This will take you through a series of prompts where you can make some changes to your MySQL installation’s security options. The first prompt will ask whether you’d like to set up the Validate Password Plugin, which can be used to test the password strength of new MySQL users before deeming them valid.
If you elect to set up the Validate Password Plugin, any MySQL user you create that authenticates with a password will be required to have a password that satisfies the policy you select. The strongest policy level — which you can select by entering
2 — will require passwords to be at least eight characters long and include a mix of uppercase, lowercase, numeric, and special characters:
OutputSecuring the MySQL server deployment. Connecting to MySQL using a blank password. VALIDATE PASSWORD COMPONENT can be used to test passwords and improve security. It checks the strength of password and allows the users to set only those passwords which are secure enough. Would you like to setup VALIDATE PASSWORD component? Press y|Y for Yes, any other key for No: Y There are three levels of password validation policy: LOW Length >= 8 MEDIUM Length >= 8, numeric, mixed case, and special characters STRONG Length >= 8, numeric, mixed case, special characters and dictionary file Please enter 0 = LOW, 1 = MEDIUM and 2 = STRONG: 2
Regardless of whether you choose to set up the Validate Password Plugin, the next prompt will be to set a password for the MySQL root user. Enter and then confirm a secure password of your choice:
OutputPlease set the password for root here. New password: Re-enter new password:
Note that even though you’ve set a password for the root MySQL user, this user is not currently configured to authenticate with a password when connecting to the MySQL shell.
If you used the Validate Password Plugin, you’ll receive feedback on the strength of your new password. Then the script will ask if you want to continue with the password you just entered or if you want to enter a new one. Assuming you’re satisfied with the strength of the password you just entered, enter
Y to continue the script:
OutputEstimated strength of the password: 100 Do you wish to continue with the password provided?(Press y|Y for Yes, any other key for No) : Y
From there, you can press
Y and then
ENTER to accept the defaults for all the subsequent questions. This will remove some anonymous users and the test database, disable remote root logins, and load these new rules so that MySQL immediately respects the changes you have made.
Once the script completes, your MySQL installation will be secured. You can now move on to creating a dedicated database user with the MySQL client.
Upon installation, MySQL creates a root user account which you can use to manage your database. This user has full privileges over the MySQL server, meaning it has complete control over every database, table, user, and so on. Because of this, it’s best to avoid using this account outside of administrative functions. This step outlines how to use the root MySQL user to create a new user account and grant it privileges.
In Ubuntu systems running MySQL
5.7 (and later versions), the root MySQL user is set to authenticate using the
auth_socket plugin by default rather than with a password. This plugin requires that the name of the operating system user that invokes the MySQL client matches the name of the MySQL user specified in the command, so you must invoke
sudo privileges to gain access to the root MySQL user:
- sudo mysql
Note: If you installed MySQL with another tutorial and enabled password authentication for root, you will need to use a different command to access the MySQL shell. The following will run your MySQL client with regular user privileges, and you will only gain administrator privileges within the database by authenticating:
- mysql -u root -p
Once you have access to the MySQL prompt, you can create a new user with a
CREATE USER statement. These follow this general syntax:
- CREATE USER 'username'@'host' IDENTIFIED WITH authentication_plugin BY 'password';
CREATE USER, you specify a username. This is immediately followed by an
@ sign and then the hostname from which this user will connect. If you only plan to access this user locally from your Ubuntu server, you can specify
localhost. Wrapping both the username and host in single quotes isn’t always necessary, but doing so can help to prevent errors.
You have several options when it comes to choosing your user’s authentication plugin. The
auth_socket plugin mentioned previously can be convenient, as it provides strong security without requiring valid users to enter a password to access the database. But it also prevents remote connections, which can complicate things when external programs need to interact with MySQL.
As an alternative, you can leave out the
WITH authentication_plugin portion of the syntax entirely to have the user authenticate with MySQL’s default plugin,
caching_sha2_password. The MySQL documentation recommends this plugin for users who want to log in with a password due to its strong security features.
Run the following command to create a user that authenticates with
caching_sha2_password. Be sure to change
sammy to your preferred username and
password to a strong password of your choosing:
- CREATE USER 'sammy'@'localhost' IDENTIFIED BY 'password';
Note: There is a known issue with some versions of PHP that causes problems with
caching_sha2_password. If you plan to use this database with a PHP application — phpMyAdmin, for example — you may want to create a user that will authenticate with the older, though still secure,
mysql_native_password plugin instead:
- CREATE USER 'sammy'@'localhost' IDENTIFIED WITH mysql_native_password BY 'password';
If you aren’t sure, you can always create a user that authenticates with
caching_sha2_plugin and then
ALTER it later on with this command:
- ALTER USER 'sammy'@'localhost' IDENTIFIED WITH mysql_native_password BY 'password';
After creating your new user, you can grant them the appropriate privileges. The general syntax for granting user privileges is as follows:
- GRANT PRIVILEGE ON database.table TO 'username'@'host';
PRIVILEGE value in this example syntax defines what actions the user is allowed to perform on the specified
table. You can grant multiple privileges to the same user in one command by separating each with a comma. You can also grant a user privileges globally by entering asterisks (
*) in place of the database and table names. In SQL, asterisks are special characters used to represent “all” databases or tables.
To illustrate, the following command grants a user global privileges to
DROP databases, tables, and users, as well as the power to
DELETE data from any table on the server. It also grants the user the ability to query data with
SELECT, create foreign keys with the
REFERENCES keyword, and perform
FLUSH operations with the
RELOAD privilege. However, you should only grant users the permissions they need, so feel free to adjust your own user’s privileges as necessary.
You can find the full list of available privileges in the official MySQL documentation.
GRANT statement, replacing
sammy with your own MySQL user’s name, to grant these privileges to your user:
- GRANT CREATE, ALTER, DROP, INSERT, UPDATE, DELETE, SELECT, REFERENCES, RELOAD on *.* TO 'sammy'@'localhost' WITH GRANT OPTION;
Note that this statement also includes
WITH GRANT OPTION. This will allow your MySQL user to grant any permissions that it has to other users on the system.
Warning: Some users may want to grant their MySQL user the
ALL PRIVILEGES privilege, which will provide them with broad superuser privileges akin to the root user’s privileges, like so:
- GRANT ALL PRIVILEGES ON *.* TO 'sammy'@'localhost' WITH GRANT OPTION;
Such broad privileges should not be granted lightly, as anyone with access to this MySQL user will have complete control over every database on the server.
Following this, it’s good practice to run the
FLUSH PRIVILEGES command. This will free up any memory that the server cached as a result of the preceding
CREATE USER and
- FLUSH PRIVILEGES;
Then you can exit the MySQL client:
In the future, to log in as your new MySQL user, you’d use a command like the following:
- mysql -u sammy -p
-p flag will cause the MySQL client to prompt you for your MySQL user’s password in order to authenticate.
Finally, let’s test the MySQL installation.
Regardless of how you installed it, MySQL should have started running automatically. To test this, check its status.
- systemctl status mysql.service
You’ll see output similar to the following:
Output● mysql.service - MySQL Community Server Loaded: loaded (/lib/systemd/system/mysql.service; enabled; vendor preset: enabled) Active: active (running) since Tue 2020-04-21 12:56:48 UTC; 6min ago Main PID: 10382 (mysqld) Status: "Server is operational" Tasks: 39 (limit: 1137) Memory: 370.0M CGroup: /system.slice/mysql.service └─10382 /usr/sbin/mysqld
If MySQL isn’t running, you can start it with
sudo systemctl start mysql.
For an additional check, you can try connecting to the database using the
mysqladmin tool, which is a client that lets you run administrative commands. For example, this command says to connect as a MySQL user named sammy (
-u sammy), prompt for a password (
-p), and return the version. Be sure to change
sammy to the name of your dedicated MySQL user, and enter that user’s password when prompted:
- sudo mysqladmin -p -u sammy version
You should see output similar to this:
Outputmysqladmin Ver 8.0.19-0ubuntu5 for Linux on x86_64 ((Ubuntu)) Copyright (c) 2000, 2020, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Server version 8.0.19-0ubuntu5 Protocol version 10 Connection Localhost via UNIX socket UNIX socket /var/run/mysqld/mysqld.sock Uptime: 10 min 44 sec Threads: 2 Questions: 25 Slow queries: 0 Opens: 149 Flush tables: 3 Open tables: 69 Queries per second avg: 0.038
This means MySQL is up and running.
You now have a basic MySQL setup installed on your server. Here are a few examples of next steps you can take:
Join our DigitalOcean community of over a million developers for free! Get help and share knowledge in our Questions & Answers section, find tutorials and tools that will help you grow as a developer and scale your project or business, and subscribe to topics of interest.Sign up
Hello Mark, Thanks for the share of this tutorial, it helped me a lot, First time I do this without any issues and very clear all your steps on this article. Appreciate it. Thank You.
How I can install MySQL 5? This is very important to me for using Magento 1 version.
Great Article it worked for me
This comment has been deleted
I followed your tutorial on ubuntu 16.4 and it seems to be working all fine, now I have another question, my software instruction asks: the table engine must be “MyISAM”. With new MySQL versionit’s always InnoDB. Set “default-storage-engine” option to “MyISAM” in “/etc/mysql/my.cnf”
can you guide me on how to do that?
For those who wonder why this isn’t working, it is because
sudo apt install mysql-serverinstall latest version of mysql, which is mysql 8 or latest. mysql 5.7 installation need to refers to other tutorial
I have this error at mysql_secure_installation :
Re-enter new password: … Failed! Error: Password hash should be a 41-digit hexadecimal number